I'll start this one up - RaceLubbock

**RodentReaper** · 03-02-2010, 09:00 PM

These guys are good!

Sik-mk4 · 03-02-2010, 09:02 PM

edit: wait nvm. share the experience you had with them

**RodentReaper** · 03-02-2010, 10:18 PM

They did some engine parts clean up- nice. They resurfaced a flywheel, it was out of spec so they charged minimally for their time. They could have charged more but didn't.

**telefonica** · 03-02-2010, 10:22 PM

These guys are good they do all my boat motors for my shop havent had any issues at all

**CammedRX7** · 03-02-2010, 10:31 PM

+1 to the above.

I have used them multiple times with nothing but great service and prices. Had my TII rx7 flywheel resurfaced and a broken bolt pulled out. Also just had my third gen camaro's heads redone as well.

WarShrike · 03-03-2010, 01:09 AM

Had some work done through them on the current build. Cleaned the block, honed, cleaned the rotating assembly and milled the heads for me. Very clean shop, easy to deal with.

Cody · 03-03-2010, 09:21 AM

I'll probably be having my jeep's head taken there to be flat milled, and I'll post up my experience.

TexasTechX1 · 03-03-2010, 08:50 PM

had them weld up some 16g unpolished 304 stainless for a part on my bike. looked professional! will be going to them again and again.

Jefe · 03-09-2010, 03:37 PM

My newest project is there now! Tree fiddy TBI with Vortec heads cut for bigger springs/cam and 350 Ram Jet cam for my 4x4. I must be getting lazy because they are even assembling it for me.

They did the machine work on my 360 and 454. Also, dozens of heads and engines I brought them back in & after high school while working for Andy Groves. He had the shop where Pope's is now.

Great work and friendly service.

kaine · 03-20-2010, 05:39 PM

I used them alot in the past for head work on all kinds of cars there shop is top notch if you ask me and they are the only shop I send people to..

03-02-2010, 09:00 PM	#1
RodentReaper Grinchy Join Date: Jan 2010 Location: Hub city Posts: 168	I'll start this one up These guys are good! __________________ 1994 Mazda Rx7 . 94 rx7,98 cobra 10 sec car [4 sale], 84 500sl mercedes, 03 sl55amg mercedes. 2 rotor vids.......... 11.26ride http://www.youtube.com/watch?v=qMCRonqqxFs 29psi trial http://www.youtube.com/watch?v=HL_KrJMS2f0 Canyon cruise.......http://www.youtube.com/watch?v=cSh0IyJpZRw

03-02-2010, 09:02 PM	#2
Sik-mk4 GTE Nutswinger Join Date: Apr 2009 Location: Plano Posts: 1,267	edit: wait nvm. share the experience you had with them __________________ Last edited by Sik-mk4; 03-02-2010 at 09:11 PM.

03-02-2010, 10:18 PM	#3
RodentReaper Grinchy Join Date: Jan 2010 Location: Hub city Posts: 168	They did some engine parts clean up- nice. They resurfaced a flywheel, it was out of spec so they charged minimally for their time. They could have charged more but didn't. __________________ 1994 Mazda Rx7 . 94 rx7,98 cobra 10 sec car [4 sale], 84 500sl mercedes, 03 sl55amg mercedes. 2 rotor vids.......... 11.26ride http://www.youtube.com/watch?v=qMCRonqqxFs 29psi trial http://www.youtube.com/watch?v=HL_KrJMS2f0 Canyon cruise.......http://www.youtube.com/watch?v=cSh0IyJpZRw

03-02-2010, 10:31 PM	#5
CammedRX7 Turbo Wankel Join Date: Jul 2004 Location: Lubbock,Texas Posts: 2,067	+1 to the above. I have used them multiple times with nothing but great service and prices. Had my TII rx7 flywheel resurfaced and a broken bolt pulled out. Also just had my third gen camaro's heads redone as well. __________________ 1994 Camaro Z28 - 1990 Camaro RS - 1987 Turbo RX7 - 1966 Ford F-100 - 1966 Ford Mustang

03-03-2010, 01:09 AM	#6
WarShrike V8 Idle V6 Scream Join Date: Aug 2005 Location: Lubbock Posts: 4,304	Had some work done through them on the current build. Cleaned the block, honed, cleaned the rotating assembly and milled the heads for me. Very clean shop, easy to deal with. __________________ 2000 Firebird A4 ●Whisper Lid●60*Inc. Heads & Intake●Intense S1X Cam●YT 1.7 RR's●FFF LT's●TCI 3800 stall●TSP Rumbler●

03-02-2010, 10:22 PM	#4
telefonica Sponsor Join Date: Oct 2008 Location: lubbock Posts: 94	These guys are good they do all my boat motors for my shop havent had any issues at all

03-03-2010, 09:21 AM	#7
Cody Anti-Totem Pole Join Date: Mar 2007 Location: SE Lubbock Posts: 5,435	I'll probably be having my jeep's head taken there to be flat milled, and I'll post up my experience. __________________ 1998 WS6 - Now parting out. If you need Fbody prices, PM me please. 2002 WS6 - DD

03-03-2010, 08:50 PM	#8
TexasTechX1 Big Nick Join Date: Mar 2008 Posts: 4,288	had them weld up some 16g unpolished 304 stainless for a part on my bike. looked professional! will be going to them again and again.

03-09-2010, 03:37 PM	#9
Jefe 2nd Gear Join Date: Aug 2007 Posts: 292	My newest project is there now! Tree fiddy TBI with Vortec heads cut for bigger springs/cam and 350 Ram Jet cam for my 4x4. I must be getting lazy because they are even assembling it for me. They did the machine work on my 360 and 454. Also, dozens of heads and engines I brought them back in & after high school while working for Andy Groves. He had the shop where Pope's is now. Great work and friendly service.

03-20-2010, 05:39 PM	#10
kaine 1st Gear Join Date: Nov 2008 Posts: 7	I used them alot in the past for head work on all kinds of cars there shop is top notch if you ask me and they are the only shop I send people to..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
remote start?	onequick66	The General	1	12-03-2008 12:27 AM
car not wanting to start..	thepewter1	Discussions	28	04-01-2008 10:59 AM
Start but Not Start	CammedRX7	The General	4	03-07-2008 12:35 PM
Remote Start	MtyMous	Discussions	12	12-25-2007 12:03 AM
Help me my car won't start	tangerineTA	The General	20	12-29-2005 10:38 AM