| Established May 1, 2003. Welcome to the Lubbock Racing Community. Be cool to one another. |

|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Sponsor
Join Date: Oct 2008
Location: lubbock
Posts: 94
![]() |
Powersports
We are located off of 120th and I27 exit 114th st, stay on the access road south and there are two signs one says legacy marine and power sports the other says motorcycle shop. We are certified techs in American and Japanese brands, we work on all makes and models of street, dirt, ATV, and UTV we have no ten year rule here, We do service, repairs and sell parts oem or aftermarket. Marine We also work on Marine products as well, Mercruiser, Marine power, Indmar, Vovlo Penta, I know Crownline, Malibu, Tige, Bayliner, Yamaha boats, and premier pontoons inside and out done lots of electrical, engine or maitanence on these boats I do work on all other models as well, we work on inboards, outboards, vdrive and idrive systems. A little about what we can do or message about what you need done and ill take on any challenge if possible. Powersports - Engine overhauls - Suspension work - lower bikes, stretch kits, wide tire kits - led kits, street fighter kits - Complete services, valve jobs, oil changes, same day work - Tire changes, mount and balanced - We are Tucker Rockey dealers let me know what parts you need and ill order it. - Amsoil dealer - Insurance claims on both Japanese and American - Fuel injection systems and all electrical work - Pretty much anything Marine - Engine overhauls - Lower unit work - Maintenance oil changes, cooling systems, Winterizations, Dewinterizations - Wakeboard Towers, tower speaker systems, wake board racks - Swim plat forms - Electrical work fuel injections systems - Quick and quiet corsa through hull or side exit exhaust Best of all we are affordable Pick and Delivery available 32.50 per half hour 15% off for Race Lubbock If there something you need message me or contact me We do same day work I have lots of references if you need. 806 300 0318 M-Sat 9am till 6pm or later Last edited by telefonica; 03-08-2010 at 02:33 PM. |
|
|
|
|
|
#2 |
|
Grinchy
Join Date: Jan 2010
Location: Hub city
Posts: 168
![]() |
Eddie! what's up? I'd say welcome but you've been here longer than me. Here's another guy I can vouch for.
__________________
1994 Mazda Rx7 . 94 rx7,98 cobra 10 sec car [4 sale], 84 500sl mercedes, 03 sl55amg mercedes. 2 rotor vids.......... 11.26ride http://www.youtube.com/watch?v=qMCRonqqxFs 29psi trial http://www.youtube.com/watch?v=HL_KrJMS2f0 Canyon cruise.......http://www.youtube.com/watch?v=cSh0IyJpZRw
|
|
|
|
|
|
#3 |
|
Sponsor
Join Date: Oct 2008
Location: lubbock
Posts: 94
![]() |
Not much i posted on your ad about time for the summer to get here so u can get the dust off your boat and break it in more.
|
|
|
|
|
|
#4 |
|
Super Moderator
Join Date: May 2003
Location: Lubbock
Posts: 7,382
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Eddie? Eddie S.????
small world man...its beau from Family.
__________________
***2007 Lubbock Dragway Street Class Champion*** ![]() 1995 Z28 - A4 Nitrous Whore N20: 2.08 60'; 12.24 @ 119 mph N/A: 2.01 60'; 13.44 @ 103 mph 2004 Crew Cab Silverado LT - Stockish 2006 Honda TRX 450R - She Likes It Dirty! |
|
|
|
|
|
#5 |
|
Lengthy witticism...
Join Date: Mar 2009
Location: Lame.
Posts: 2,068
![]() |
I've had a number of people take their bikes in to get work done, and then come to me because the "named" shop they went to broke something else or botched the intended repair. Sometimes on an unrealistic scale.
Legacy is actually one of two shops in Lubbock who've never had one of their customers come to me under such circumstances. The only work of theirs that I've seen was done very well.
__________________
The Shocks Project 1981 Suzuki GS750E: K&N pods, Kerker exhaust, GS500 rear wheel, FZR600 front end, 30mm VM carburetors, 520 conversion, stainless lines, Progressive springs, 15w oil, EBC pads, EBC semi-floating front rotors, YZF600 4-piston Blue dots, CBR F4i regulator/rectifier, 16g wound stator, Trailtech Vapor race computer, and a tractor battery. Need bike work in Lubbock? $35/hr rates, 10% discounts available (some stack). Justin Duncan, 470 2743 Check out our Etsy shop! |
|
|
|
|
|
#6 |
|
Sponsor
Join Date: Oct 2008
Location: lubbock
Posts: 94
![]() |
There is another shop name legacy, no wonder ive had wierd calls about a guy named allen, who has been messing up boats, they keep calling me or emailing say i messed jacked up there boats, and ive never touched there boats or bikes.
|
|
|
|
|
|
#7 |
|
Sponsor
Join Date: Oct 2008
Location: lubbock
Posts: 94
![]() |
whats up beau yes sir its me eddie
|
|
|
|
|
|
#8 |
|
Lengthy witticism...
Join Date: Mar 2009
Location: Lame.
Posts: 2,068
![]() |
Are you the one that advertises on Craigslist Motorcycles/Scooters all the time? That would be the one I'm referring to. I've had a couple of people come from there for quick maintenance and small jobs, generally pleased.
__________________
The Shocks Project 1981 Suzuki GS750E: K&N pods, Kerker exhaust, GS500 rear wheel, FZR600 front end, 30mm VM carburetors, 520 conversion, stainless lines, Progressive springs, 15w oil, EBC pads, EBC semi-floating front rotors, YZF600 4-piston Blue dots, CBR F4i regulator/rectifier, 16g wound stator, Trailtech Vapor race computer, and a tractor battery. Need bike work in Lubbock? $35/hr rates, 10% discounts available (some stack). Justin Duncan, 470 2743 Check out our Etsy shop! |
|
|
|
|
|
#9 |
|
Sponsor
Join Date: Oct 2008
Location: lubbock
Posts: 94
![]() |
yeah you know me we talked along time ago, yeah i lost a couple of people cause my labor rate went up but got to pay rent and other bills for the shop so no biggie got lots other new customers. Some have come back but did lose a couple of peps.
Last edited by telefonica; 03-10-2010 at 07:09 PM. |
|
|
|
|
|
#10 |
|
'98 Camaro Z28
|
i can vouch for eddie as well! cool dude here.....
__________________
![]() |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| G2G Info | SVT_WMD | Get Togethers - Lubbock | 4 | 07-08-2008 10:16 PM |
| Info on some parts | West TX Z06 | Discussions | 4 | 09-18-2007 12:31 PM |
| NEW INFO ON CAR | Jerry | Discussions | 42 | 07-18-2007 04:25 PM |
| needing some info | R.J. | The Blue Oval | 0 | 08-29-2006 12:32 PM |
| info | redlightning | Member Introductions | 15 | 11-23-2005 09:37 AM |